A. Beginning July 1, 1995, no individual shall engage in, or offer to engage in, work as a tradesman as defined in § 54.1-1128 unless he has been licensed under the provisions of this article. Individuals shall not be subject to licensure as a tradesman when working under the supervision of a tradesman who is licensed in the specialty for which work is being performed. Individuals holding a license in one specialty shall not be required to have a tradesman license in another specialty when performing work which is incidental to work being performed under their own specialty license.
B. Beginning July 1, 1998, no individual shall present himself as a certified backflow prevention device worker as defined in § 54.1-1128 unless he has been certified under the provisions of this article. Individuals certified as backflow prevention device workers shall not be required to hold any other professional or occupational license or certification; however, nothing in this subsection shall prohibit an individual from holding more than one professional or occupational license or certification. The certification program set forth in this article concerning backflow prevention device workers shall be voluntary and shall not be construed to prevent or affect the practice of backflow prevention device workers by those not certified by the Board, so long as any requirements of the applicable local governing body’s programs relating to backflow prevention device workers are met. All local governing bodies shall accept certification by the Board of backflow prevention device workers as proof of experience and training without requiring additional examination.
C. Beginning one year after the effective date of the Board’s final regulations, no individual shall engage in, or offer to engage in, work as a liquefied petroleum gas fitter or natural gas fitter provider as defined in § 54.1-1128 unless he has been licensed under the provisions of this article.
D. Beginning July 1, 2007, no individual shall engage in the drilling, installation, maintenance, or repair of a water well or water well system unless a certified water well systems provider is onsite at all times. Until June 30, 2012, any level of certification shall satisfy this requirement. Beginning July 1, 2012, only a certified individual shall engage in the drilling, installation, maintenance, or repair of a water well or water well system and a then certified master water well systems provider shall be available at all times. Nothing in this subsection shall be construed to prohibit licensed plumbing tradesman from (i) completing work contained in the applicable plumbing code, or (ii) performing normal maintenance and repair on large-diameter bored or hand-dug water table wells provided such wells are 100 feet or less in depth and the work is being performed for an entity granted tax-exempt status under § 501(c)(3) of the Internal Revenue Code.