§ 45.2-837 Bleeder systems
A. Every mine shall have a system, approved by the Chief, of bleeder openings of air courses designed to provide positive movement of air through or around worked-out areas. Such system shall be sufficient to prevent a hazardous accumulation of gas in any such area and to minimize the effect of variations in atmospheric pressure. Each operator shall submit a bleeder system plan that complies with requirements developed by the Chief.
B. The system requirements developed by the Chief shall, at a minimum, address standards for (i) supplemental roof supports, (ii) water accumulation, (iii) continuous movement of gases from gob areas, (iv) methane content, (v) the use and operation of degasification systems, (vi) air flow direction and content, and (vii) ventilation controls. The Chief shall not approve a plan that provides for a methane content exceeding 4.5 percent in bleeder air courses.
C. This section shall not prohibit the sealing of worked-out areas in accordance with § 45.2-845. The mine map requirements of § 45.2-542 may be used to depict bleeder system standards specified in this section.
D. Failure to comply with an approved plan is a violation of this section.
History
The record of this law’s original creation isn’t available online. It has been modified 8 times. Those modifications are cataloged by “The Acts of Assembly,” a state publication, by year and chapter. Those modifications that can be read on the General Assembly’s website will be linked accordingly. Those modifications are as follows: in 1954, chapter 191; in 1966, chapter 594; in 1968, chapter 310; in 1978, chapter 120; in 1993, chapter 442; in 1994, chapter 28; in 1996, chapter 774; in 1999, chapter 256.
Code 1950, § 45-60.4; 1954, c. 191; 1966, c. 594, § 45.1-56; 1968, c. 310; 1978, c. 120; 1993, c. 442; 1994, c. 28, § 45.1-161.220; 1996, c. 774; 1999, c. 256; 2021, Sp. Sess. I, c. 387.